变势能阱双稳态气动弹性能量收集的性能增强研究

提出一种新型的磁耦合变势能阱双稳态压电颤振能量收集器，设计了外部磁场作用下颤振能量收集系统的双稳态构型，并利用弹性支撑的外部磁铁的运动实现了变势能阱技术，解释了变势能阱双稳态对颤振能量收集系统的性能增强机理。建立了磁力-压电-气动弹性耦合的颤振能量收集系统的动力学分析模型，根据非线性磁偶极模型以及平衡点稳定性理论，讨论了系统出现双稳态构型的参数条件。对磁耦合双稳态颤振能量收集系统的动态特性进行了数值仿真研究，结果显示，双稳态构型能够使无磁力颤振能量收集系统的超临界颤振行为转变为亚临界颤振，发生极限环振动的风速能够降低50%以上，拓宽了能量收集器的有效工作风速范围，并分析了磁铁间距、磁偶极矩对能量收集性能的影响规律。采用弹性支撑的外部磁铁的运动来自适应调节内外部磁铁之间的距离，达到变势能阱的目的，有效地降低了双稳态的势能阱深度，使系统更容易发生双稳态势能阱间的跃迁运动，从而在双稳态的设计基础上，实现了能量收集工作风速范围和输出电功率的同步提升，为低风速下的能量收集提供了一种有效的设计途径。     

实物标准电阻器智能输出系统的研究

针对实物电阻器输出阻值的改变只能通过手动方式实施的问题,设计了一套智能控制系统,实现实物电阻器阻值的数字化输出。将多只四端标准电阻器以一定的排列顺序串联连接,利用四端标准电阻器的原理特点,所有串联电阻共用一对电位端,在每只电阻器的左右分别都有一个电流输出端,电流输出端线路中接入继电器控制开关,以控制继电器的开通闭合,来实现电阻器的不同组合输出。本系统经试用,性能稳定、准确度高、实时性好、适用范围广、试运行情况良好。     

热电偶测温过程中温度跳跃问题的分析及处理

通过对热电偶在测量温度中出现的温度跳跃问题进行分析,对其可能产生故障的原因逐一排查并提出解决方案,重点分析了热电偶在串入附加地电势后导致温度跳跃的原因。本文的研究对于在使用热电偶进行实际工程测量时具有一定指导作用,并对该问题的理论研究具有一定借鉴意义。     

脉冲等离子体源控制航天器表面充电电位的研究

在空间环境运行的航天器存在表面充电现象,而航天器表面充电引发的静电放电是导致航天器异常及故障的重要原因之一。因此,在航天器设计和应用中,必须对航天器表面电位采取必要的控制和防护措施。文章介绍了用脉冲等离子体源进行航天器表面充电电位主动控制的研究。通过模拟实验和实验数据分析,证实了用脉冲等离子体源能有效地控制航天器表面充...     

基于势函数法的航天器自主姿态机动控制

主要研究存在禁止姿态的航天器自主姿态机动控制问题.首先,给出航天器的动力学和运动学模型,利用四元数描述航天器与机动姿态和禁止姿态的姿态偏差,用相应的欧拉转角描述不同姿态间的距离.为利用势函数完成禁止姿态回避,结合航天器的运动情况设计排斥势函数(RPF)存在条件后,根据禁止姿态最小允许夹角构造一种新的排斥势函数.接着,利...     

Electric potential structures of auroral acceleration region border from multi-spacecraft Cluster data

This paper studies an auroral event using data from three spacecraft of the Cluster mission, one inside and two at the poleward edge of the bottom of the Auroral Acceleration Region (AAR). The study reveals the three-dimensional profile of the region’s poleward boundary, showing spatial segmentation of the electric potential structures and their decay in time. It also depicts localized magnetic field variations and field-aligned currents that appear to have remained stable for at least 80?s. Such observations became possible due to the fortuitous motion of the three spacecraft nearly parallel to each other and tangential to the AAR edge, so that the differences and variations can be seen when the spacecraft enter and exit the segmentations, hence revealing their position with respect to the AAR.     

航天器表面电荷激发空间静电场规律研究

从带电表面微元出发，通过求解泊松方程，得到带电介质平板表面邻近空间静电势的解析表达式，建立介质表面电位-介电常数模型，求得了带电介质平板表面电位、表面带电量和介质介电常数三者之间的关系式。结合典型的航天器表面介质材料带电案例，对此类圆盘结构介质平板带电问题进行了仿真分析，结果表明，在介质材料表面电位一定的情况下，表面电荷激发的空间静电势值随距离的增大而减小，并且距离介质表面越近，电势的空间变化率越大；在介质材料带电量相等的情况下，介质表面电位随着介质介电常数的增大而减小，并逐渐趋于一个稳定值，所以在一定范围内选择介电常数较大的介质材料可以降低介质的表面电位，减小介质间发生静电放电的几率。     

低频电连接器检测方法研究CSCD

本文主要阐述了低频电连接器外观检测和电性能测试中的接触电阻、绝缘电阻和介质耐电压的检测方法及其注意事项,提出为满足武器系统对低频电连接器耐恶劣环境、高可靠的特殊需求,有效保证武器型号系统中电连接器的质量,必须规范低频电连接器外观及电性能指标检测标准。本文可为从事低频电连接器检测工作的人员提供参考。     

一种手持式校准控制器设计与实现

舰船电工仪表是舰船航行及舰载各动力系统、武器系统、测控系统运行状态的主要判断依据。针对传统的计量校准方法存在的效率低、可靠性难以保证等方面的问题,设计了一种轻便、可靠的手持式校准控制器,控制标准设备输出,同时具备信息录入、数据存储等功能,实现了对舰船电工仪表现场原位快速计量校准,并通过测试数据比对,验证了此方法可行。     

A fast and automatic full-potential finite volume solver on Cartesian grids for unconventional configurations

To meet the requirements of fast and automatic computation of subsonic and transonic aerodynamics in aircraft conceptual design,a novel finite volume solver for full potential flows on adaptive Cartesian grids is developed in this paper.Cartesian grids with geometric adaptation are firstly generated automatically with boundary cells processed by cell-cutting and cell-merging algo rithms.The nonlinear full potential equation is discretized by a finite volume scheme on these Cartesian grids and iteratively solved in an implicit fashion with a generalized minimum residual (GMRES) algorithm.During computation,solution-based mesh adaptation is also applied so as to capture flow features more accurately.An improved ghost-cell method is proposed to implement the non-penetration wall boundary condition where the velocity-potential of a ghost cell is modified by an analytic method instead.According to the characteristics of the Cartesian grids,the Kutta condition is applied by specially computing the gradients on Kutta-faces without directly assigning the potential jump to cells adjacent wake faces,which can significantly improve the solution con verging speed.The feasibility and accuracy of the proposed method are validated by several typical cases of sub/transonic flows around an ONERA M6 wing,a DLR-F4 wing-body,and an unconventional figuration of a blended wing body (BWB).The validation cases demonstrate a fast convergence with fully automatic grid treatment and computation,and the results suggest its capacity in application for aircraft conceptual design.